+ CLICK IMAGES TO ZOOM
7" TFT LCD Display 800x400 - HDMI/VGA/NTSC/PAL -(No touchscreen) Works with Raspberry Pi & Banana Pi
Sorry, this item is temporarily out of stock.
Make a nice video setup with this 7" screen at 800x480 resolution (HDMI) for your Raspberry Pi, Banana Pi or Any device that uses HDMI/VGA or Composite Video.
PRESET MODE FOR PC VGA are: 640x480, 800x600, 1024x600, 1024x768, 1280x1024
For this model, we tried to get an inexpensive 800x480 display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw TTL' display, the model has an extra-bright backlight that looks much better than other 7" TFTs we've tested. We include a driver board with HDMI, VGA and Composite inputs. The setup is very easy to use - simply connect a 5-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports .
The little wired PCB with little buttons will let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display. Also included is an IR remote control that lets you easily access all functions as well as power (Battery not included. it takes a CR 2025)
Will work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.
For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 800x480 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.
For use with a BeagleBone Black running Ubuntu/Debian, we found it works when plugged in, no configuration required.
It also works great with the Banana Pi - We tried it with Kali Linux and works out of the box.
A power adapter is NOT included. You will need to either purchase a 5-12VDC adapter or our 9VDC 1000mA adapter is a prefect fit for it (center positive)
No Soldering required but you will have to connect the LVDS ribbon cable from the screen to the driver board. Follow the pictures above for the correct positioning of the LCD ribbon cable.
- Driver Datasheet
- Keyboard Datasheet
- Power with 5-24VDC
- 16:10 display ratio
- Resolution: 800 x 480
- Visible area: 154mm x 86mm 16:10
- Display dimensions: 165mm x 100mm x 6mm (6.5" x 3.9" x 0.2")
- Brightness: 400cd/m2
- Contrast: 500:1
- Uses an AT070TN94 display - with a brighter backlight than the AT070TN90 or AT070TN92
- Weight (excluding power cable): 144g
- Not HDCP compatible - it cannot be used with 'secured' HDMI sources