TinyOne Lipo Charger Pro Kit - Lipo Solar/Charger 5VDC portable power supply

+ CLICK IMAGES TO ZOOM

TinyOne Lipo Charger Pro Kit - Lipo Solar/Charger 5VDC portable power supply TinyOne Lipo Charger Pro Kit - Lipo Solar/Charger 5VDC portable power supply TinyOne Lipo Charger Pro Kit - Lipo Solar/Charger 5VDC portable power supply TinyOne Lipo Charger Pro Kit - Lipo Solar/Charger 5VDC portable power supply

TinyOne Lipo Charger Pro Kit - Lipo Solar/Charger 5VDC portable power supply

Adafruit

$ 36.99 

Sorry, this item is temporarily out of stock.

DESCRIPTION   

(Please read foot note for lipo-battery shipping restrictions)
Go portable and power your favorite electronic kit with green energy! The TinyOne Lipo Charger pro Kit allows you to ride the solar wave to run your favorite 5V device with this portable 5VDC power supply and solar lipo battery charger.
The TinyOne Lipo Charger Pro Kit is the ideal green power solution for your outdoor-portable or mobile applications. Attach the TinyOne Lipo Charger board to your device and it can run on solar power forever! It can also be used to charge a mobile phone, power a Raspberry Pi, Banana Pi, Arduino board, and any project that uses 5VDC up to 1A load. The TinyOne Lipo Charger Pro supplies a stable 5VDC 1A through a USB 2.0 connector. The solar panel trickle charges the Lipo (Lithium Polymer) battery and  the internal charger IC handles all the power flow between the various components. In case solar power is not sufficient, the mini USB port allows you to charge your lithium battery through USB. It can also be used to program your kit without detaching the LiPo Rider Pro board. It works great with our 3.7V 2000mAh or  3.7V 1200 mAh Lipo battery. but any 3.7V Lipo battery will do the higher the mAh the longer your device will run on battery power but the longer it will take to re-charge. our 3.7V 1200mAh took about a 1.5Hr to fully charge on a sunny day, and the 3.7V 1200mAh battery can power a Raspberry Pi model B+ for about 3 Hrs of course the more devices you attach to your Pi the more power it consumes we just measured the Raspberry Pi B+ with no other peripherals being powered by the B+ if you want to calculate how long the battery will last and see the power consumption as well as the voltage our Charger Doctor device is a  must have. 
Features
  • Maximum 1A load output
  • Battery and Solar panel connector is JST 2.0
  • Stable 5V USB power supply regardless of source
  • Charge/Recharge algorithms built into chip
  • Charge Lithium Polymer Battery through solar power or USB
  • Stable supply voltage through either lithium battery or USB
  • 2 x USB ports let you program your kit while charging your Lithium battery
  • LED indications for battery full or charging states - 
  • 4 green LED instruct quantity of electricity of lithium battery. Each LED indicates an increment of 25% - for example 1 LED=25% charge 2 LEDs=50% charge 3 LEDs=75% Charge and 4 LEDs=100% 
Numbers of LEDs
Battery Charge
4
90~100%
3
60~90%
2
30~60%
1
10~30%
0
0~10%
 
This Kit Includes
NOTE TO INTERNATIONAL BUYERS: PER USPS REGULATIONS WE CAN NOT SHIP LITHIUM POLYMER BATTERIES INTERNATIONALLY - 
WE CAN ONLY SHIP THE KIT WITHOUT THE LIPO BATTERY.

    We accept these payment methods:

    Amex Discover Google Mastercard Paypal Visa